Grundsätzliche Infos:
250GB HD250HJ Samsung - zweite Platte im Rechner - eine Partition über die ganze Platte. Nach einem BSOD durch IAStoreUI (Intel Manager), sicherlich infolge des Cruical M4-Firmware-Problems, war die Systemplatte weg (Intel Smart Response, Cruical M4 als Cache für die Systemplatte). Mit Reparaturinstallation wieder in Gang gebracht. Möglicherweise hat bei den ersten Versuchen, den Rechner zu starten, das EFI-Bios die erste Platte, die es finden konnte, unglücklich beschrieben..
Analyse with Intel-Partition
same HDD (250HJ) with same Partition looks like that - functional
after Quicksearch - NTFS with 59GB
[RAW] nach BSOD
Forum rules
Your help is welcome: there are currently few answers or none to most message posted in the German forum!
If you want to post a request for help, please consider using the English forum.
Your help is welcome: there are currently few answers or none to most message posted in the German forum!
If you want to post a request for help, please consider using the English forum.
Re: [RAW] nach BSOD
quick search II
Log after first Trial with Intel
deeper search
deeper search II
-----------------------------------Log after first Trial with Intel
Code: Select all
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=249952206848
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\D:)=0
Warning: can't get size for \\.\D:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\E:)=1000203305472
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\F:)=250057064448
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\G:)=4030709760
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\H:)=0
Warning: can't get size for \\.\H:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\I:)=0
Warning: can't get size for \\.\I:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\J:)=0
Warning: can't get size for \\.\J:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\L:)=0
Warning: can't get size for \\.\L:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\W:)=2962161664
Hard disk list
Disk /dev/sda - 250 GB / 232 GiB - CHS 30401 255 63, sector size=512 - SAMSUNG HD250HJ, S/N:0SRU9JPD8B4591, FW:FH10
Disk /dev/sdb - 250 GB / 232 GiB - CHS 30401 255 63, sector size=512 - SAMSUNG HD250HJ, S/N:0SRU9JPD8B4581, FW:FH10
Disk /dev/sdc - 250 GB / 232 GiB - CHS 30401 255 63, sector size=512 - SAMSUNG HD250HJ, S/N:0SRU9JPD8B4502, FW:FH10
Disk /dev/sdd - 1000 GB / 931 GiB - CHS 121601 255 63, sector size=512 - SAMSUNG HD103SJ, S/N:2S641JBC091158, FW:1AJ1
Disk /dev/sde - 4034 MB / 3847 MiB - CHS 490 255 63, sector size=512 - Generic STORAGE DEVICE, S/N:000000000551, FW:0551
Drive W: - 2962 MB / 2824 MiB - CHS 706 64 32, sector size=2048 - Optiarc DVD RW AD-7283S, FW:1.01
Partition table type (auto): Intel
Disk /dev/sdb - 250 GB / 232 GiB - SAMSUNG HD250HJ
Partition table type: Intel
Analyse Disk /dev/sdb - 250 GB / 232 GiB - CHS 30401 255 63
Geometry from i386 MBR: head=256 sector=63
check_part_i386 1 type EE: no test
Current partition structure:
1 P EFI GPT 0 0 2 267349 89 4 4294967295
Warning: Bad ending head (CHS and LBA don't match)
No partition is bootable
search_part()
Disk /dev/sdb - 250 GB / 232 GiB - CHS 30401 255 63
NTFS at 30401/0/1
filesystem size 116631900
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 7289493
clusters_per_mft_record -10
clusters_per_index_record 1
file_pread(5,4096,buffer,494683521(30792/159/25)) lseek err Invalid argument
file_pread(5,1,buffer,494683521(30792/159/25)) lseek err Invalid argument
NTFS: Can't read MFT
HPFS - NTFS 30401 0 1 37660 254 63 116631900
NTFS, blocksize=4096, 59 GB / 55 GiB
This partition ends after the disk limits. (start=488392065, size=116631900, end=605023964, disk end=488397168)
file_pread(5,2,buffer,488398848(30401/107/43)) lseek err Invalid argument
file_pread(5,1,buffer,488398848(30401/107/43)) lseek err Invalid argument
file_pread(5,15,buffer,488398849(30401/107/44)) lseek err Invalid argument
file_pread(5,3,buffer,488398864(30401/107/59)) lseek err Invalid argument
file_pread(5,3,buffer,488398911(30401/108/43)) lseek err Invalid argument
file_pread(5,8,buffer,488398927(30401/108/59)) lseek err Invalid argument
file_pread(5,11,buffer,488398974(30401/109/43)) lseek err Invalid argument
file_pread(5,2,buffer,488400896(30401/140/12)) lseek err Invalid argument
Disk /dev/sdb - 250 GB / 232 GiB - CHS 30401 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (250 GB / 232 GiB) seems too small! (< 309 GB / 288 GiB)
The following partition can't be recovered:
HPFS - NTFS 30401 0 1 37660 254 63 116631900
NTFS, blocksize=4096, 59 GB / 55 GiB
Results
interface_write()
No partition found or selected for recovery
search_part()
Disk /dev/sdb - 250 GB / 232 GiB - CHS 30401 255 63
HFS magic value at 21706/193/55
part_size 76088437
HFS 16970 120 59 21706 193 56 76088437
HFS found using backup sector!, 38 GB / 36 GiB
NTFS at 30401/0/1
filesystem size 116631900
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 7289493
clusters_per_mft_record -10
clusters_per_index_record 1
file_pread(5,4096,buffer,494683521(30792/159/25)) lseek err Invalid argument
file_pread(5,1,buffer,494683521(30792/159/25)) lseek err Invalid argument
NTFS: Can't read MFT
HPFS - NTFS 30401 0 1 37660 254 63 116631900
NTFS, blocksize=4096, 59 GB / 55 GiB
This partition ends after the disk limits. (start=488392065, size=116631900, end=605023964, disk end=488397168)
file_pread(5,2,buffer,488398848(30401/107/43)) lseek err Invalid argument
file_pread(5,1,buffer,488398848(30401/107/43)) lseek err Invalid argument
file_pread(5,1,buffer,488398847(30401/107/42)) lseek err Invalid argument
Disk /dev/sdb - 250 GB / 232 GiB - CHS 30401 255 63
Check the harddisk size: HD jumpers settings, BIOS detection...
The harddisk (250 GB / 232 GiB) seems too small! (< 309 GB / 288 GiB)
The following partition can't be recovered:
HPFS - NTFS 30401 0 1 37660 254 63 116631900
NTFS, blocksize=4096, 59 GB / 55 GiB
Results
L HFS 16970 120 59 21706 193 56 76088437
HFS found using backup sector!, 38 GB / 36 GiB
interface_write()
1 P HFS 16970 120 59 21706 193 56 76088437
Re: [RAW] nach BSOD
Um mir mal selbst n bisschen zu helfen 
Würde es vielleicht helfen, wenn ich den Header von der einen auf die andere Platte kopiere?

Würde es vielleicht helfen, wenn ich den Header von der einen auf die andere Platte kopiere?
Re: [RAW] nach BSOD
Könnte Jemand von den Qualifizierten etwas dazu sagen. Noch weigere ich mich, die HDD/Partition als verloren anzusehen. Danke im Voraus. mfg chmee