
bonjour je suis nouveau dans l'utilisation de testdisk, j'ai recu un HDD externe que je dois faire fonctionner, voici les caractéristiques de mon labo:
serveur elonex
OS Linux Débian
disque 250 Go
Je vous donne les messages lors du test:
TestDisk 6.11, Data Recovery Utility, April 2009
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sdb - 250 GB / 232 GiB - CHS 30401 255 63
Current partition structure:
Partition Start End Size in sectors
1 P HPFS - NTFS 0 1 1 30400 239 63 488391057 [Mevis]
Bad sector count.
No partition is bootable
Si j'ai bien compris, il y a un problème du nombre de secteur ?
Il n'y a pas de partition bootable ?

TestDisk 6.11, Data Recovery Utility, April 2009
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sdb - 250 GB / 232 GiB - CHS 30402 255 63
Warning: the current number of heads per cylinder is 255
but the correct value may be 240.
You can use the Geometry menu to change this value.
It's something to try if
- some partitions are not found by TestDisk
- or the partition table can not be written because partitions overlaps.
Là il me semble qu'il y a plus de cylindre que normal ?

TestDisk 6.11, Data Recovery Utility, April 2009
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org
Disk /dev/sdb - 250 GB / 232 GiB - CHS 30402 255 63
Partition Start End Size in sectors
* HPFS - NTFS 0 1 1 30400 254 63 488392002 [Mevis]
Structure: Ok. Use Up/Down Arrow keys to select partition.
Use Left/Right Arrow keys to CHANGE partition characteristics:
*=Primary bootable P=Primary L=Logical E=Extended D=Deleted
Keys A: add partition, L: load backup, T: change type, P: list files,
Enter: to continue NTFS, 250 GB / 232 GiB
La structure est bonne ?
par contre NTFS 250GB/232GIB GB c'est ok, mais le GIB ???

Merci de me dire ce que vous en pensez et les corrections que je pourrais apporter
